Your HP laptop can get stuck on the HP logo screen due to a variety of reasons. Here are the most common ones: Hardware issues: This can range from a failing hard drive, faulty RAM, or even an overheating CPU. Your laptop might be unable to proceed with the booting process because it can't access or use these hardware components properly.

Press and hold the Windows key and the B key at the same time, and then press and hold the power button for 2 to 3 seconds. Release the Power button but continue pressing the Windows and B keys. You might hear a series of beeps. The HP BIOS Update screen displays and the recovery begins automatically.
Your HP laptop being stuck on the HP logo might be caused by problems with the software system's graphics card drivers. Thus, resetting the graphics driver could fix the issue. Press the "Windows + Ctrl + Shift + B" keys when you see the HP logo. It will initiate the OS to reset the graphic card automatically. Fix 5: Repair System Files
You can do this by pressing the Windows Logo key + Ctrl + Shift + B at the logo screen. This shortcut will prompt Windows into restarting the graphics driver. If this doesn't work for you, it's time to perform some HP hardware diagnostics tests.

Reconnect the power cord, then turn on the computer to confirm if the issue is resolved. If you are able to boot into BIOS try the steps recommended below to restore BIOS to default. 1. Turn off the computer and wait five seconds. 2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu. 3.

.
  • v98adwxrkw.pages.dev/288
  • v98adwxrkw.pages.dev/198
  • v98adwxrkw.pages.dev/248
  • v98adwxrkw.pages.dev/374
  • v98adwxrkw.pages.dev/175
  • v98adwxrkw.pages.dev/197
  • v98adwxrkw.pages.dev/76
  • v98adwxrkw.pages.dev/167
  • v98adwxrkw.pages.dev/340

    • hp stuck on logo screen